Paver sealing for Saint Johns homes
Paver Sealing in Saint Johns, FL
New Saint Johns driveways in SilverLeaf and Beachwalk fade in the Florida sun, so call (904) 747-6756 for a free estimate.
- Brings out deeper paver color
- Fresh joint sand helps lock pavers in place
- Gives weeds less room to grow
- Makes the surface easier to keep clean
- Free estimate, no obligation
Request a Free Estimate
Free, no obligation.
Fast, careful paver sealing in Saint Johns
Paver sealing is available in Saint Johns, from Beachwalk east of I-95 to RiverTown on the river, and the estimate is free. A local contractor washes, re-sands and seals driveways, pool decks and lanai floors. Once you request your free estimate, a Saint Johns reply comes within 1 business day, usually much sooner.
Picture a builder-grade driveway five or six years on, gray at the tire lanes and soft at the joints. A wash, new sand and a fresh coat bring back the color the sales model showed. Call (904) 747-6756 and say what you are seeing, with no obligation to book anything.
Why hire a local paver sealing contractor in Saint Johns?
Most Saint Johns homes sit in planned communities with watering schedules, preserve edges and parking rules, and each one shapes the job. Homeowners here lean toward a contractor who already works around those rules, so request your free estimate and mention your community.
A visit before any price
The contractor walks your Saint Johns driveway and pool deck first. The estimate is free and you owe nothing for it.
The range to measure against
Northeast Florida companies commonly publish $1.75 to $3.25 per square foot to clean, sand and seal. Use it to check any bid.
Matte or wet look
You choose the sheen. Matte keeps a quiet finish, while a wet look adds shine but shows scuffs sooner.
Your schedule, your call
You pick the date around your HOA rules and watering day, and you can say no to the quote.
Get Your Free Estimate in Saint Johns
Tell us about your pavers in Saint Johns.
Free, no obligation
What paver problems show up most in Saint Johns?
Builder pavers sealed too soon or not at all
Much of Saint Johns is new. Durbin Crossing broke ground in 2005, and SilverLeaf and Beachwalk are still filling in. One Jacksonville company says new pavers should wait 30 to 60 days before a first seal, so the white salts can rise and clear. Another company serving this area says about 90 days. A coat put on too early can lock that haze under it. Ask the contractor to check the surface with water first, since a haze that will not rinse off points to a coat that went on early.
Sprinklers on an assigned schedule
St. Johns County now gives reclaimed water users watering days and times by address, starting in Silver Landing. Spray that lands on pavers every week leaves them damp along the edges, which is where mildew and stains begin. That schedule also decides when the pavers can be dry enough to seal. Plan the date so the sprinklers stay off before and after. Turning the spray heads a little away from the edge can help the new coat last.
Flatwoods ground that stays wet
Much of this part of the county is flatwoods sand. The USDA says Myakka soils on flatwoods drain poorly, with water within 18 inches of the surface for 1 to 4 months in most years. A wet base under a driveway can let pavers settle at the low corner. Sealer only preserves that dip, which means the low spot gets fixed first. RiverTown lots near the river and homes beside the creeks may see this more often after a wet summer.
Shade along the preserve line
Beachwalk set aside 500 acres as preserve, and Durbin Crossing left more than half its land undisturbed. Homes that back up to those woods get afternoon shade on the patio. Moss and algae seldom grow on pavers unless shade is heavy, so the green film shows up on the side that faces the trees. Expect that strip to need extra cleaning. On a lanai floor that never gets direct sun, a matte finish can be easier to keep clean.
Joint sand gone after one storm
A company working in Saint Johns says a single summer storm can wash sand out of a driveway's joints. Once the sand sits below the surface, pavers start to shift and sealing becomes a repair. Weeds follow, since soil settles into wide joints. Catching it early keeps the fix small and the price lower. A quick walk along the driveway after a big storm will show you whether the joints have dropped.
Does my Saint Johns community change how pavers get sealed?
Yes, because the big planned communities differ in age, water and setting. Durbin Crossing, between Racetrack Road and CR 210, dates to 2005, so many of its driveways have seen years of sun. SilverLeaf, west of I-95, is newer and still growing toward 10,700 homes. Name your community when you request your free estimate, since that hints at how old the pavers are.
RiverTown is the one master-planned community on the St. Johns River in the county, reached from State Road 13 and Long Leaf Pine Parkway. Homes there run from about 1,700 to more than 3,500 square feet, so pool decks and courtyards vary a lot in size. Beachwalk, about a mile east of I-95, wraps around a 14-acre lagoon. Call (904) 747-6756 and describe which surfaces you want done, from the front walk to the lagoon-side patio.
Most of these communities have an HOA, and that brings parking rules. One Jacksonville company tells HOA residents to check street parking ahead of time, because cars stay off a fresh coat for about a day. Cimarrone and Elm Creek owners may face the same question. Look up your rules first, then request your free estimate so the date works for your street.
What does paver sealing cost in Saint Johns?
Saint Johns bids generally fit the regional range companies publish, $1.75 to $3.25 per square foot to clean, sand and seal. In Saint Johns, the low end tends to fit a newer driveway with clean joints, while shade growth and sunken spots push toward the top. One Jacksonville company says bigger jobs that include a driveway, walk and pool deck get a better rate per foot. Call (904) 747-6756 for a free number for your layout.
Small jobs cost more per square foot, since setup takes the same time either way. A preserve-side patio with heavy green film or a corner that needs resetting adds labor. A good bid names the sealer brand and spells out the work in writing, so you can compare. When you request your free estimate, ask for the square footage on the quote.
| Paved area | Typical example | Clean, sand and seal |
|---|---|---|
| 300 sq ft | Small patio or walkway | $525 to $975 |
| 600 sq ft | Two car driveway | $1,050 to $1,950 |
| 1,000 sq ft | Large driveway or pool deck | $1,750 to $3,250 |
| 1,500 sq ft | Driveway plus pool deck | $2,625 to $4,875 |
Math based on the $1.75 to $3.25 per square foot that Northeast Florida paver companies published as of November 2026. Your contractor sets the actual price after seeing the surface. Repairs, leveling and stripping failed sealer are usually extra.
How does a paver sealing job work in Saint Johns?
Look over the lot and the old coat
The contractor checks how water leaves your Saint Johns driveway and where shade from the preserve hangs over the patio. Low corners on flatwoods ground get marked for repair, since sealing preserves any dip. If the builder sealed the pavers, the product matters, because water-based sealer cannot go over solvent-based sealer. Tell the contractor what you know about the builder and the year the pavers went in.
Clean off tire marks and mildew
A surface cleaner lifts grime from the drive lanes and the green film from shaded edges. Stains from sprinkler spray get treated now, before any coat can trap them. Rinse water is kept out of the pool on lagoon-side and pool deck jobs. This step takes the most time on older pavers. Oil spots under the car get a pre-treatment, though a deep stain may not come out all the way.
Reset low spots and refill the joints
Settled pavers get lifted and the base gets fixed. Washing pulls joint sand out, so new sand goes in and is swept until the joints are full. Tight joints leave weeds less room to start. On a newer Saint Johns driveway, this part may go quickly. Fresh joints also help hold the pavers in place under car tires.
Let the pavers dry out
Moisture trapped under sealer can leave it cloudy, so the pavers must be dry. The contractor plans around your watering day and the afternoon storms. Shaded patios near preserve land often dry slower than the sunny front drive. Sometimes that means waiting an extra day. Under the 2026 water shortage rules, wells were on the one-day schedule too, so ask about yours.
Spray, back-roll and keep cars off
The sealer is sprayed on and then rolled into the joints in the finish you picked. The next Saint Johns coat is usually two to five years out, by common quotes. Cars stay off for about a day, so park where your HOA allows. Foot traffic usually comes back sooner. Ask for the sealer name in writing so the next coat can match it.
Complete paver services in Saint Johns
A Saint Johns job starts with a wash that lifts tire marks and mildew without blasting out the joints. Fresh sand goes in next and is swept tight. The pavers then dry before a sprayed coat is back-rolled into the surface. Call (904) 747-6756 to ask how long each step would take on your lot.
Driveways here take daily tires and sprinkler spray, so they wear first. Pool decks in Beachwalk and RiverTown get sun, splash and bare feet, which calls for a finish with grip. Shaded lanai floors near preserve land go green sooner. Name the surfaces on your list when you request your free estimate.
Sealer comes in a matte or a wet look, and the old coat matters as well. Water-based sealer cannot go over solvent-based sealer, so the contractor checks what the builder or a past owner used. A wet look shows scuffs sooner than matte, which counts on a busy driveway. Call (904) 747-6756 to talk through the finish before work starts.
Timing in Saint Johns follows the rain, the sprinklers and the age of the pavers. Sealer needs a dry surface, so the watering day and the forecast both get checked. New pavers may need to wait a month or more before a first coat. To get a date that fits your community, request your free estimate.
Questions to ask before you hire
- If the forecast turns wet, how do you decide whether to push the date?
- How many days should cars stay off a freshly sealed driveway?
- How is payment split between the start and the finish?
- In this heat and humidity, how many years do you expect the coat to hold?
- Can you send proof of liability insurance and tell me what license this job calls for?
- Would you seal a small patch first so I can see the result?
- Will you sweep in new joint sand, and what kind do you use?
What do sealed pavers look like around Saint Johns?
Why local matters in Saint Johns
A contractor who works Saint Johns knows the county now sets watering days by address in places like Silver Landing. That one detail decides when your pavers can be dry for sealer. It also explains the damp, stained edge along the lawn. To reach someone who plans around it, call (904) 747-6756.
Age matters as much as place. A first seal in a fresh SilverLeaf section is a different job from a reseal in Durbin Crossing, from the wait time to the finish. Say what year your home was built when you request your free estimate.
On flatwoods ground the water table can sit high for months, so settling comes up before sealer does. Fixing a sinking corner first means the coat goes on level pavers. Otherwise you pay to preserve a dip, so if your drive has a low corner, call (904) 747-6756.
Is my home in Saint Johns if the mail used to say Jacksonville?
Yes, most likely, since mail in this part of St. Johns County was listed under Jacksonville until 2005. That year a USPS poll picked the name St. Johns over Fruit Cove, Bartram and River Oaks. The area sits about halfway between downtown Jacksonville and downtown St. Augustine. If your address changed in the switch, call (904) 747-6756 and give the street.
Today Saint Johns is known by its schools and communities, such as Creekside and Bartram Trail high schools and Ocean Palms Elementary near Beachwalk. Julington-Durbin Preserve guards about nine miles of creek shore where Julington and Durbin creeks meet. Veterans Park and Durbin Crossing Park serve families along Racetrack Road. Near any of them, you can request your free estimate and get a free estimate.
Frequently Asked Questions
Why is paver sealing so expensive in Saint Johns?
Labor makes up most of a Saint Johns bill, far more than the sealer. The job includes washing, re-sanding, drying time and two coats, and low spots get fixed first. Northeast Florida companies commonly publish $1.75 to $3.25 per square foot for the full clean, sand and seal.
Is it a good idea to pressure wash pavers in Saint Johns?
Yes, when it is done with care and followed by new sand. Washing pulls sand out of the joints, so it has to be replaced before sealing. Too much pressure can scar the surface, so ask what the contractor uses on your Saint Johns driveway. A gentle wash also keeps the edges of older builder pavers from chipping.
How long does sealer last on pavers in Saint Johns, Florida?
Expect two to five years between coats on a Saint Johns home, the span companies tend to quote. Driveways with daily tires and pool decks in full sun tend to land on the shorter side. A quick check is to sprinkle water: if it beads, the coat still works, and if it soaks in, the coat is spent.
Is it better to spray or roll paver sealer in Saint Johns?
Pros usually do both, spraying first and then back-rolling. The spray lays down an even film and the roller drives it into the joints, a Jacksonville company says. Rolling alone can leave lap marks, and spraying alone can lay it on too thick.
How soon can new pavers in a Saint Johns community be sealed?
Wait at least a month, and often longer. One Jacksonville company says 30 to 60 days so white salts can rise and clear, and another company serving Saint Johns says about 90 days. Ask the contractor to look first if your home is in a new SilverLeaf or Beachwalk section.
Where do I park while my Saint Johns driveway cures?
Park on the street or in a spot your HOA allows. Cars usually stay off a fresh coat for about a day, depending on the sealer and weather. One Jacksonville company tells HOA residents to check street parking rules ahead of time. Walking across it is usually fine after a few hours.
Does my watering day matter for sealing pavers in Saint Johns?
Yes, because sealer needs a dry surface. St. Johns County assigns reclaimed water days by address in some communities, so the sprinklers should be off before and after the coat. Tell the contractor your watering day when you set the date.
Will sealing fix a sunken corner on my Saint Johns driveway?
No, a sunken corner needs repair before sealing. A Jacksonville company points out that a coat freezes whatever shape the pavers are in. On wet flatwoods ground, point out every low spot at the first visit so the base can be fixed first. A level base also helps the new coat wear evenly.
Do I need HOA approval to seal pavers in Saint Johns?
It depends on your association's rules, so read them before you book. Many Saint Johns communities, from Durbin Crossing to SilverLeaf, have an HOA. A clear matte coat changes the look less than a wet look, which some boards care about, so ask your board if you are unsure.
What do professionals use to seal pavers in Saint Johns?
They use a water-based or solvent-based paver sealer in a matte or wet look. The old coat decides which one can go on, since water-based cannot go over solvent-based. Ask the contractor to name the product on the quote so you can compare bids.
Ready for a Free Estimate in Saint Johns?
Call (904) 747-6756 and tell us about your pavers.
Free, no obligation